F5 BigIP Administration and all Labs Deep Dive in F5 Series

Identity and access management is the set of policies and systems that create, verify, govern and retire identities and decide what each one may reach.

Least privilege is the principle that every user, process and system should hold only the access required for its current task, and no more.

A firewall is a control that allows or blocks network traffic according to rules about its source, destination, protocol and, in modern forms, its content and the application it belongs to.

A VLAN divides one physical switched network into several logical segments, each with its own broadcast domain, by tagging frames with a VLAN identifier so that ports and devices in different VLANs cannot reach each other without a router.

Network address translation rewrites the addresses and ports in packets as they cross a network boundary, most commonly so that many devices with private addresses can share one public address to reach the internet.

DHCP is the protocol by which a device joining a network asks for and receives an address, a subnet mask, a default gateway and DNS servers from a server, for a limited lease period, so that nobody has to configure addresses by hand.

Object storage keeps every file as a self-contained object (the bytes, a unique key and some metadata) inside a flat bucket you read and write over HTTP, with no drive to mount and no directory tree underneath it.

Load balancing is the practice of putting one entry point in front of several interchangeable servers and distributing incoming requests among them by a chosen policy, so that no single machine carries the traffic and no single machine's failure takes the service down.

A CDN is a worldwide network of servers that answers requests for your site from a location near the person asking, instead of sending every request back to the single machine your site runs on.