IoT#4: IoT (Internet of Things) Automation with Raspberry Pi

Routing is how packets move between networks: each router holds a table of known destinations and the next hop toward each, learned by configuration or by a protocol, and forwards each packet to the most specific match.

Switching is the forwarding of frames within a single network segment by a device that learns which hardware address sits on which port and sends each frame only where it needs to go.

A VLAN divides one physical switched network into several logical segments, each with its own broadcast domain, by tagging frames with a VLAN identifier so that ports and devices in different VLANs cannot reach each other without a router.

A container is an application packaged together with the libraries and configuration it needs, run as an isolated process on a host that is already switched on, so the same package behaves the same way on a laptop, in a build pipeline and in production.

Object storage keeps every file as a self-contained object (the bytes, a unique key and some metadata) inside a flat bucket you read and write over HTTP, with no drive to mount and no directory tree underneath it.

Load balancing is the practice of putting one entry point in front of several interchangeable servers and distributing incoming requests among them by a chosen policy, so that no single machine carries the traffic and no single machine's failure takes the service down.